Practice Test 1 : Quantitative Aptitude

Solve the following and check with the answers given at the end.

--------------------------------------------------------------------------------------------------------------------------------------

1. It was calculated that 75 men could complete a piece of work in 20 days. When work was scheduled to commence, it was found necessary to send 25 men to another project. How much longer will it take to complete the work?

--------------------------------------------------------------------------------------------------------------------------------------
2. A student divided a number by 2/3 when he required to multiply by 3/2. Calculate the percentage of error in his result.

--------------------------------------------------------------------------------------------------------------------------------------
3. A dishonest shopkeeper professes to sell pulses at the cost price, but he uses a
false weight of 950gm. for a kg. His gain is ...%.

--------------------------------------------------------------------------------------------------------------------------------------
4. A software engineer has the capability of thinking 100 lines of code in five
minutes and can type 100 lines of code in 10 minutes. He takes a break for five
minutes after every ten minutes. How many lines of codes will he complete typing after an hour?

--------------------------------------------------------------------------------------------------------------------------------------
5. A man was engaged on a job for 30 days on the condition that he would get a
wage of Rs. 10 for the day he works, but he have to pay a fine of Rs. 2 for each
day of his absence. If he gets Rs. 216 at the end, he was absent for work for ...
days.

--------------------------------------------------------------------------------------------------------------------------------------
6. A contractor agreeing to finish a work in 150 days, employed 75 men each
working 8 hours daily. After 90 days, only 2/7 of the work was completed.
Increasing the number of men by ________ each working now for 10 hours daily,
the work can be completed in time.

--------------------------------------------------------------------------------------------------------------------------------------
7. what is a percent of b divided by b percent of a?
(a) a
(b) b
(c) 1
(d) 10
(e) 100

--------------------------------------------------------------------------------------------------------------------------------------
8.A man bought a horse and a cart. If he sold the horse at 10 % loss and the cart at 20 % gain, he would not lose anything; but if he sold the horse at 5% loss and the cart at 5% gain, he would lose Rs. 10 in the bargain. The amount paid by him was
Rs._______ for the horse and Rs.________ for the cart.
 --------------------------------------------------------------------------------------------------------------------------------------

9. A tennis marker is trying to put together a team of four players for a tennis
tournament out of seven available. males - a, b and c; females – m, n, o and p. All
players are of equal ability and there must be at least two males in the team. For a team of four, all players must be able to play with each other under the following restrictions:
b should not play with m,
c should not play with p, and
a should not play with o.
Which of the following statements must be false?
1. b and p cannot be selected together
2. c and o cannot be selected together
3. c and n cannot be selected together.

--------------------------------------------------------------------------------------------------------------------------------------
10-12.
The following figure depicts three views of a cube. Based on this, answer
questions 10-12.

10. The number on the face opposite to the face carrying 1 is _______ .

--------------------------------------------------------------------------------------------------------------------------------------
11. The number on the faces adjacent to the face marked 5 are _______ .

--------------------------------------------------------------------------------------------------------------------------------------
12. Which of the following pairs does not correctly give the numbers on the opposite faces.
(1) 6,5
(2) 4,1
(3) 1,3
(4) 4,2

--------------------------------------------------------------------------------------------------------------------------------------
13. Five farmers have 7, 9, 11, 13 & 14 apple trees, respectively in their orchards. Last year, each of them discovered that every tree in their own orchard bore exactly the same number of apples. Further, if the third farmer gives one apple to the first, and the fifth gives three to each of the second and the fourth, they would all have exactly the same number of apples. What were the yields per tree in the orchards of the third and fourth farmers?

--------------------------------------------------------------------------------------------------------------------------------------
14. Five boys were climbing a hill. J was following H. R was just ahead of G. K was between G & H. They were climbing up in a column. Who was the second?

--------------------------------------------------------------------------------------------------------------------------------------
15-18 John is undecided which of the four novels to buy. He is considering a spy
thriller, a Murder mystery, a Gothic romance and a science fiction novel. The
books are written by Rothko, Gorky, Burchfield and Hopper, not necessary in that order, and published by Heron, Piegon, Blueja and sparrow, not necessary in that order.
(1) The book by Rothko is published by Sparrow.
(2) The Spy thriller is published by Heron.
(3) The science fiction novel is by Burchfield and is not published by Blueja.
(4)The Gothic romance is by Hopper.
15. Pigeon publishes ____________.

--------------------------------------------------------------------------------------------------------------------------------------
16. The novel by Gorky ________________.

--------------------------------------------------------------------------------------------------------------------------------------
17. John purchases books by the authors whose names come first and third in
alphabetical order. He does not buy the books ______.

--------------------------------------------------------------------------------------------------------------------------------------
18. On the basis of the first paragraph and statement (2), (3) and (4) only, it is
possible to deduce that
1. Rothko wrote the murder mystery or the spy thriller
2. Sparrow published the murder mystery or the spy thriller
3. The book by Burchfield is published by Sparrow.

--------------------------------------------------------------------------------------------------------------------------------------
19. If a light flashes every 6 seconds, how many times will it flash in 3⁄4 of an hour?

--------------------------------------------------------------------------------------------------------------------------------------
20. If point P is on line segment AB, then which of the following is always true?
(1) AP = PB 

(2) AP > PB 

(3) PB > AP 

(4) AB > AP 

(5) AB > AP + PB

--------------------------------------------------------------------------------------------------------------------------------------
21. All men are vertebrates. Some mammals are vertebrates. Which of the following conclusions drawn from the above statement is correct.
(a) All men are mammals
(b) All mammals are men
(c) Some vertebrates are mammals.
(d) None

--------------------------------------------------------------------------------------------------------------------------------------
22. Which of the following statements drawn from the given statements are correct?
Given: All watches sold in that shop are of high standard. Some of the HMT watches are sold in that shop.
a) All watches of high standard were manufactured by HMT.
b) Some of the HMT watches are of high standard.
c) None of the HMT watches is of high standard.
d) Some of the HMT watches of high standard are sold in that shop.

--------------------------------------------------------------------------------------------------------------------------------------
Given Data,

23-27.
1. Ashland is north of East Liverpool and west of Coshocton.
2. Bowling green is north of Ashland and west of Fredericktown.
3. Dover is south and east of Ashland.
4. East Liverpool is north of Fredericktown and east of Dover.
5. Fredericktown is north of Dover and west of Ashland.
6. Coshocton is south of Fredericktown and west of Dover.

--------------------------------------------------------------------------------------------------------------------------------------
23. Which of the towns mentioned is furthest of the north – west
(a) Ashland
(b) Bowling green
(c) Coshocton
(d) East Liverpool
(e) Fredericktown

--------------------------------------------------------------------------------------------------------------------------------------
24. Which of the following must be both north and east of Fredericktown?
(a) Ashland
(b) Coshocton
(c) East Liverpool
I a only
II b only
III c only
IV a & b
V a & c

--------------------------------------------------------------------------------------------------------------------------------------
25. Which of the following towns must be situated both south and west of at least one other town?
A. Ashland only
B. Ashland and Fredericktown
C. Dover and Fredericktown
D. Dover, Coshocton and Fredericktown
E. Coshocton, Dover and East Liverpool.

--------------------------------------------------------------------------------------------------------------------------------------
26. Which of the following statements, if true, would make the information in the numbered statements more specific?
(a) Coshocton is north of Dover.
(b) East Liverpool is north of Dover
(c) Ashland is east of Bowling green.
(d) Coshocton is east of Fredericktown
(e) Bowling green is north of Fredericktown

--------------------------------------------------------------------------------------------------------------------------------------
27. Which of the numbered statements gives information that can be deduced from one or more of the other statements?
(A) 1
(B) 2
(C) 3
(D) 4
(E) 6

--------------------------------------------------------------------------------------------------------------------------------------
28. Eight friends Harsha, Fakis, Balaji, Eswar, Dhinesh, Chandra, Geetha, and
Ahmed are sitting in a circle facing the center. Balaji is sitting between Geetha
and Dhinesh. Harsha is third to the left of Balaji and second to the right of
Ahmed. Chandra is sitting between Ahmed and Geetha and Balaji and Eshwar are not sitting opposite to each other. Who is third to the left of Dhinesh?

--------------------------------------------------------------------------------------------------------------------------------------
29. If every alternative letter starting from B of the English alphabet is written in small letter, rest all are written in capital letters, how the month ― September‖ be written.
(1) SeptEMbEr 

(2) SEpTeMBEr 

(3) SeptembeR
(4) SepteMber
(5) None of the above.

--------------------------------------------------------------------------------------------------------------------------------------
30. The length of the side of a square is represented by x+2. The length of the side of an equilateral triangle is 2x. If the square and the equilateral triangle have equal perimeter, then the value of x is _______.
 --------------------------------------------------------------------------------------------------------------------------------------

31. It takes Mr. Karthik y hours to complete typing a manuscript. After 2 hours, he was called away. What fractional part of the assignment was left incomplete?

--------------------------------------------------------------------------------------------------------------------------------------
32. Which of the following is larger than 3/5?
(1) 1⁄2
(2) 39/50 

(3) 7/25
(4) 3/10
(5) 59/100

--------------------------------------------------------------------------------------------------------------------------------------
33. The number that does not have a reciprocal is ____________.

--------------------------------------------------------------------------------------------------------------------------------------
34. There are 3 persons Sudhir, Arvind, and Gauri. Sudhir lent cars to Arvind and Gauri as many as they had already. After some time Arvind gave as many cars to Sudhir and Gauri as many as they have. After sometime Gauri did the same thing. At the end of this transaction each one of them had 24. Find the cars each originally had.

--------------------------------------------------------------------------------------------------------------------------------------
35. A man bought a horse and a cart. If he sold the horse at 10 % loss and the cart at 20 % gain, he would not lose anything; but if he sold the horse at 5% loss and the cart at 5% gain, he would lose Rs. 10 in the bargain. The amount paid by him was Rs._______ for the horse and Rs.________ for the cart.

--------------------------------------------------------------------------------------------------------------------------------------

C Aptitude Part VIII

Note : All the programs are tested under Turbo C/C++ compilers.
It is assumed that,
Programs run under DOS environment,
The underlying machine is an x86 system,
Program is compiled using Turbo C/C++ compiler.
The program output may depend on the information based on this assumptions
(for example sizeof(int) == 2 may be assumed).
---------------------------------------------------------------------------------------------------------------------------------------
Predict the output or error(s) for the following:
---------------------------------------------------------------------------------------------------------------------------------------
161)
#define assert(cond) if(!(cond)) \
(fprintf(stderr, "assertion failed: %s, file %s, line %d \n",#cond,\
__FILE__,__LINE__), abort())
void main()
{
int i = 10;
if(i==0)
assert(i < 100);
else
printf("This statement becomes else for if in assert macro");
}
Answer:
No output
Explanation:
The else part in which the printf is there becomes the else for if in the assert
macro. Hence nothing is printed.
The solution is to use conditional operator instead of if statement,
#define assert(cond) ((cond)?(0): (fprintf (stderr, "assertion failed: \ %s, file %s,
line %d \n",#cond, __FILE__,__LINE__), abort()))
Note:
However this problem of ―matching with nearest else‖ cannot be solved
by the usual method of placing the if statement inside a block like this,
#define assert(cond) { \
if(!(cond)) \
(fprintf(stderr, "assertion failed: %s, file %s, line %d \n",#cond,\
__FILE__,__LINE__), abort()) \
}
---------------------------------------------------------------------------------------------------------------------------------------
162)
Is the following code legal?
struct a
{
int x;
struct a b;
}
Answer:
No
Explanation:
Is it not legal for a structure to contain a member that is of the same
type as in this case. Because this will cause the structure declaration to be
recursive without end.
---------------------------------------------------------------------------------------------------------------------------------------
163) Is the following code legal?
struct a
{
int x;
struct a *b;
}
Answer:
Yes.
Explanation:
*b is a pointer to type struct a and so is legal. The compiler knows, the
size of the pointer to a structure even before the size of the structure
is determined(as you know the pointer to any type is of same size). This
type of structures is known as  ̳self-referencing‘ structure.
---------------------------------------------------------------------------------------------------------------------------------------
164) Is the following code legal?
typedef struct a
{
int x;
aType *b;
}aType
Answer:
No
Explanation:
The typename aType is not known at the point of declaring the structure
(forward references are not made for typedefs).
---------------------------------------------------------------------------------------------------------------------------------------
165) Is the following code legal?
typedef struct a aType;
struct a
{
int x;
aType *b;
};
Answer:
Yes
Explanation:
The typename aType is known at the point of declaring the structure,
because it is already typedefined.
---------------------------------------------------------------------------------------------------------------------------------------
166) Is the following code legal?
void main()
{
typedef struct a aType;
aType someVariable;
struct a
{
int x;
aType *b;
};
}
Answer:
No
Explanation:
When the declaration,
typedef struct a aType;
is encountered body of struct a is not known. This is known as  ̳incomplete
types‘.
---------------------------------------------------------------------------------------------------------------------------------------
167) void main()
{
printf(―sizeof (void *) = %d \n―, sizeof( void *));
printf(―sizeof (int *) = %d \n‖, sizeof(int *));
printf(―sizeof (double *) = %d \n‖, sizeof(double *));
printf(―sizeof(struct unknown *) = %d \n‖, sizeof(struct unknown *));
}
Answer
:
sizeof (void *) = 2
sizeof (int *) = 2
sizeof (double *) = 2
sizeof(struct unknown *) = 2
Explanation:
The pointer to any type is of same size.
---------------------------------------------------------------------------------------------------------------------------------------
168) char inputString[100] = {0};
To get string input from the keyboard which one of the following is better?
1) gets(inputString)
2) fgets(inputString, sizeof(inputString), fp)
Answer & Explanation:
The second one is better because gets(inputString) doesn't know the size
of the string passed and so, if a very big input (here, more than 100 chars)
the charactes will be written past the input string. When fgets is used with
stdin performs the same operation as gets but is safe.
---------------------------------------------------------------------------------------------------------------------------------------
169) Which version do you prefer of the following two,
1) printf(―%s‖,str); // or the more curt one
2) printf(str);
Answer & Explanation:
Prefer the first one. If the str contains any format characters like %d then
it will result in a subtle bug.
---------------------------------------------------------------------------------------------------------------------------------------
170) void main()
{
int i=10, j=2;
int *ip= &i, *jp = &j;
int k = *ip/*jp;
printf(―%d‖,k);
}
Answer:
Compiler Error: ―Unexpected end of file in comment started in line 5‖.
Explanation:
The programmer intended to divide two integers, but by the ―maximum munch‖ rule, the compiler treats the operator sequence / and * as /* which happens to be the starting of comment. To force what is intended by the programmer,
int k = *ip/ *jp;
// give space explicity separating / and *
//or
int k = *ip/(*jp);
// put braces to force the intention
will solve the problem.
---------------------------------------------------------------------------------------------------------------------------------------
171) void main()
{
char ch;
for(ch=0;ch<=127;ch++)
printf(―%c %d \n―, ch, ch);
}
Answer:
Implementation dependent
Explanation:
The char type may be signed or unsigned by default. If it is signed then
ch++ is executed after ch reaches 127 and rotates back to -128. Thus ch is
always smaller than 127.
---------------------------------------------------------------------------------------------------------------------------------------
172) Is this code legal?
int *ptr;
ptr = (int *) 0x400;
Answer:
Yes
Explanation:
The pointer ptr will point at the integer in the memory location 0x400.
---------------------------------------------------------------------------------------------------------------------------------------
173) main()
{
char a[4]="HELLO";
printf("%s",a);
}
Answer:
Compiler error: Too many initializers
Explanation:
The array a is of size 4 but the string constant requires 6 bytes to get stored.
---------------------------------------------------------------------------------------------------------------------------------------
174)
main()
{
char a[4]="HELL";
printf("%s",a);
}
Answer:
HELL%@!~@!@???@~~!
Explanation:
The character array has the memory just enough to hold the string ―HELL‖ and doesnt have enough space to store the terminating null character. So it prints the HELL correctly and continues to print garbage values till it accidentally comes across a NULL character.
 ---------------------------------------------------------------------------------------------------------------------------------------
175)
main()
{
int a=10,*j;
void *k;
j=k=&a;
j++;
k++;
printf("\n %u %u ",j,k);
}
Answer:
Compiler error: Cannot increment a void pointer
Explanation:
Void pointers are generic pointers and they can be used only when the
type is not known and as an intermediate address storage type. No pointer
arithmetic can be done on it and you cannot apply indirection operator (*)
on void pointers.
---------------------------------------------------------------------------------------------------------------------------------------

177)
Printf can be implemented by using __________ list.
Answer:
Variable length argument lists
---------------------------------------------------------------------------------------------------------------------------------------
178) char *someFun()
{
char *temp = ―string constant";
return temp;
}
int main()
{
puts(someFun());
}
Answer:
string constant
Explanation:
The program suffers no problem and gives the output correctly because the
character constants are stored in code/data area and not allocated in stack, so this doesn‘t lead to dangling pointers.
---------------------------------------------------------------------------------------------------------------------------------------
179)
char *someFun1()
{
char temp[ ] = ―string";
return temp;
}
char *someFun2()
{
char temp[ ] = { ̳s‘,  ̳t‘,‘r‘,‘i‘,‘n‘,‘g‘};
return temp;
}
int main()
{
puts(someFun1());
puts(someFun2());
}
Answer:
Garbage values.
Explanation:
Both the functions suffer from the problem of dangling pointers. In someFun1()
temp is a character array and so the space for it is allocated in heap and is initialized with character string ―string‖. This is created dynamically as the function is called, so is also deleted dynamically on exiting the function so the string data is not available in the calling function main() leading to print some garbage values. The function someFun2() also suffers from the same problem but the problem can be easily identified in this case.
 ---------------------------------------------------------------------------------------------------------------------------------------

C Aptitude Part VII

Note : All the programs are tested under Turbo C/C++ compilers.
It is assumed that,
Programs run under DOS environment,
The underlying machine is an x86 system,
Program is compiled using Turbo C/C++ compiler.
The program output may depend on the information based on this assumptions
(for example sizeof(int) == 2 may be assumed).
---------------------------------------------------------------------------------------------------------------------------------------
Predict the output or error(s) for the following:
---------------------------------------------------------------------------------------------------------------------------------------
126)
int aaa() {printf(―Hi‖);}
int bbb(){printf(―hello‖);}
iny ccc(){printf(―bye‖);}
main()
{
int ( * ptr[3]) ();
ptr[0] = aaa;
54ptr[1] = bbb;
ptr[2] =ccc;
ptr[2]();
}
Answer:
bye
Explanation:
int (* ptr[3])() says that ptr is an array of pointers to functions that takes
no arguments and returns the type int. By the assignment ptr[0] = aaa; it
means that the first function pointer in the array is initialized with the
address of the function aaa. Similarly, the other two array elements also
get initialized with the addresses of the functions bbb and ccc. Since ptr[2]
contains the address of the function ccc, the call to the function ptr[2]() is
same as calling ccc(). So it results in printing "bye".
---------------------------------------------------------------------------------------------------------------------------------------
127)
main()
{
int i=5;
printf(―%d‖,i=++i ==6);
}
Answer:
1
Explanation:
The expression can be treated as i = (++i==6), because == is of higher
precedence than = operator. In the inner expression, ++i is equal to 6
yielding true(1). Hence the result.
---------------------------------------------------------------------------------------------------------------------------------------
128)
main()
{
char p[ ]="%d\n";
p[1] = 'c';
printf(p,65);
}
Answer:
A
Explanation:
Due to the assignment p[1] =  ̳c‘ the string becomes, ―%c\n‖. Since this
string becomes the format string for printf and ASCII value of 65 is  ̳A‘,
the same gets printed.
---------------------------------------------------------------------------------------------------------------------------------------
129)
void ( * abc( int, void ( *def) () ) ) ();
Answer::
abc is a ptr to a function which takes 2 parameters .(a). an integer
variable.(b).
a ptrto a funtion which returns void. the return type of the
function is void.
Explanation:
Apply the clock-wise rule to find the result.
---------------------------------------------------------------------------------------------------------------------------------------
130) main()
{
while (strcmp(―some‖,‖some\0‖))
printf(―Strings are not equal\n‖);
}
Answer:
No output
Explanation:
Ending the string constant with \0 explicitly makes no difference. So
―some‖ and ―some\0‖ are equivalent. So, strcmp returns 0 (false) hence
breaking out of the while loop.
---------------------------------------------------------------------------------------------------------------------------------------
131) main()
{
char str1[] = { ̳s‘,‘o‘,‘m‘,‘e‘};
char str2[] = { ̳s‘,‘o‘,‘m‘,‘e‘,‘\0‘};
while (strcmp(str1,str2))
printf(―Strings are not equal\n‖);
}
Answer:
―Strings are not equal‖
―Strings are not equal‖
....
Explanation:
If a string constant is initialized explicitly with characters,  ̳\0‘ is not
appended automatically to the string. Since str1 doesn‘t have null
termination, it treats whatever the values that are in the following positions
as part of the string until it randomly reaches a  ̳\0‘. So str1 and str2 are
not the same, hence the result.
---------------------------------------------------------------------------------------------------------------------------------------
132)
main()
{
int i = 3;
for (;i++=0;) printf(―%d‖,i);
}
Answer:
Compiler Error: Lvalue required.
Explanation:
As we know that increment operators return rvalues and hence it
cannot appear on the left hand side of an assignment operation.
---------------------------------------------------------------------------------------------------------------------------------------
133) void main()
{
int *mptr, *cptr;
mptr = (int*)malloc(sizeof(int));
printf(―%d‖,*mptr);
int *cptr = (int*)calloc(sizeof(int),1);
printf(―%d‖,*cptr);
}
Answer:
garbage-value 0
Explanation:
The memory space allocated by malloc is uninitialized, whereas calloc
returns the allocated memory space initialized to zeros.
---------------------------------------------------------------------------------------------------------------------------------------
134) void main()
{
static int i;
while(i<=10)
(i>2)?i++:i--;
printf(―%d‖, i);
}
Answer:
32767
Explanation:
Since i is static it is initialized to 0. Inside the while loop the conditional
operator evaluates to false, executing i--. This continues till the integer
value rotates to positive value (32767). The while condition becomes false
and hence, comes out of the while loop, printing the i value.
---------------------------------------------------------------------------------------------------------------------------------------
135) main()
{
int i=10,j=20;
j = i, j?(i,j)?i:j:j;
printf("%d %d",i,j);
}
Answer:
10 10
Explanation:
The Ternary operator ( ? : ) is equivalent for if-then-else statement. So the
question can be written as:
if(i,j)
{
if(i,j)
j = i;
else
j = j;
}
else
j = j;
136)
1. const char *a;
2. char* const a;
3. char const *a;
-Differentiate the above declarations.
Answer:
1. 'const' applies to char * rather than 'a' ( pointer to a constant char )
*a='F'
: illegal
a="Hi"
: legal
2. 'const' applies to 'a' rather than to the value of a (constant pointer to
char )
*a='F'
a="Hi"
: legal
: illegal
3. Same as 1.
---------------------------------------------------------------------------------------------------------------------------------------
137)
main()
{
int i=5,j=10;
i=i&=j&&10;
printf("%d %d",i,j);
}
Answer:
1 10
Explanation:
The expression can be written as i=(i&=(j&&10)); The inner expression
(j&&10) evaluates to 1 because j==10. i is 5. i = 5&1 is 1. Hence the
result.
---------------------------------------------------------------------------------------------------------------------------------------
138)
main()
{
int i=4,j=7;
j = j || i++ && printf("YOU CAN");
printf("%d %d", i, j);
}
Answer:
4 1
Explanation:
The boolean expression needs to be evaluated only till the truth value of
the expression is not known. j is not equal to zero itself means that the
expression‘s truth value is 1. Because it is followed by || and true ||
(anything) => true where (anything) will not be evaluated. So the
remaining expression is not evaluated and so the value of i remains the
same.
Similarly when && operator is involved in an expression, when any of the
operands become false, the whole expression‘s truth value becomes false
and hence the remaining expression will not be evaluated.
false && (anything) => false where (anything) will not be evaluated.
---------------------------------------------------------------------------------------------------------------------------------------
139)
main()
{
register int a=2;
printf("Address of a = %d",&a);
printf("Value of a = %d",a);
}
Answer:
Compier Error: '&' on register variable
Rule to Remember:
& (address of ) operator cannot be applied on register variables.
---------------------------------------------------------------------------------------------------------------------------------------
140)
main()
{
float i=1.5;
switch(i)
{
case 1: printf("1");
case 2: printf("2");
default : printf("0");
}
}
Answer:
Compiler Error: switch expression not integral
Explanation:
Switch statements can be applied only to integral types.
---------------------------------------------------------------------------------------------------------------------------------------
141)
main()
{
extern i;
printf("%d\n",i);
{
int i=20;
printf("%d\n",i);
}
}
Answer:
Linker Error : Unresolved external symbol i
Explanation:
The identifier i is available in the inner block and so using extern has no
use in resolving it.
---------------------------------------------------------------------------------------------------------------------------------------
142)
main()
{
int a=2,*f1,*f2;
f1=f2=&a;
*f2+=*f2+=a+=2.5;
printf("\n%d %d %d",a,*f1,*f2);
}
Answer:
16 16 16
Explanation:
f1 and f2 both refer to the same memory location a. So changes through f1
and f2 ultimately affects only the value of a.
---------------------------------------------------------------------------------------------------------------------------------------
143)
main()
{
char *p="GOOD";
char a[ ]="GOOD";
printf("\n sizeof(p) = %d, sizeof(*p) = %d, strlen(p) = %d", sizeof(p),
sizeof(*p), strlen(p));
printf("\n sizeof(a) = %d, strlen(a) = %d", sizeof(a), strlen(a));
}
Answer:
sizeof(p) = 2, sizeof(*p) = 1, strlen(p) = 4
sizeof(a) = 5, strlen(a) = 4
Explanation:
sizeof(p) => sizeof(char*) => 2
sizeof(*p) => sizeof(char) => 1
Similarly,
sizeof(a) => size of the character array => 5
When sizeof operator is applied to an array it returns the sizeof the array
and it is not the same as the sizeof the pointer variable. Here the sizeof(a)
where a is the character array and the size of the array is 5 because the
space necessary for the terminating NULL character should also be taken
into account.
---------------------------------------------------------------------------------------------------------------------------------------
144)
#define DIM( array, type) sizeof(array)/sizeof(type)
main()
{
int arr[10];
printf(―The dimension of the array is %d‖, DIM(arr, int));
}
Answer:
10
Explanation:
The size of integer array of 10 elements is 10 * sizeof(int). The macro
expands to sizeof(arr)/sizeof(int) => 10 * sizeof(int) / sizeof(int) => 10.
---------------------------------------------------------------------------------------------------------------------------------------
145) int DIM(int array[])
{
return sizeof(array)/sizeof(int );
}
main()
{
int arr[10];
printf(―The dimension of the array is %d‖, DIM(arr));
}
Answer:
1
Explanation:
Arrays cannot be passed to functions as arguments and only the pointers
can be passed. So the argument is equivalent to int * array (this is one of
the very few places where [] and * usage are equivalent). The return
statement becomes, sizeof(int *)/ sizeof(int) that happens to be equal in
this case.
---------------------------------------------------------------------------------------------------------------------------------------
146) main()
{
static int a[3][3]={1,2,3,4,5,6,7,8,9};
int i,j;
static *p[]={a,a+1,a+2};
for(i=0;i<3;i++)
{
for(j=0;j<3;j++)
printf("%d\t%d\t%d\t%d\n",*(*(p+i)+j),
*(*(j+p)+i),*(*(i+p)+j),*(*(p+j)+i));
}
}
Answer:
1
2
3
4
1
4
7
2
1
2
3
4
1
4
7
2
615
6
7
8
9
5
8
3
6
9
5
6
7
8
9
5
8
3
6
9
Explanation:
*(*(p+i)+j) is equivalent to p[i][j].
---------------------------------------------------------------------------------------------------------------------------------------
147)
main()
{
void swap();
int x=10,y=8;
swap(&x,&y);
printf("x=%d y=%d",x,y);
}
void swap(int *a, int *b)
{
*a ^= *b, *b ^= *a, *a ^= *b;
}
Answer:
x=10 y=8
Explanation:
Using ^ like this is a way to swap two variables without using a temporary
variable and that too in a single statement.
Inside main(), void swap(); means that swap is a function that may take
any number of arguments (not no arguments) and returns nothing. So this
doesn‘t issue a compiler error by the call swap(&x,&y); that has two
arguments.
This convention is historically due to pre-ANSI style (referred to as
Kernighan and Ritchie style) style of function declaration. In that style, the
swap function will be defined as follows,
void swap()
int *a, int *b
{
*a ^= *b, *b ^= *a, *a ^= *b;
}
where the arguments follow the (). So naturally the declaration for swap
will look like, void swap() which means the swap can take any number of
arguments.
---------------------------------------------------------------------------------------------------------------------------------------
148)
main()
{
int i = 257;
int *iPtr = &i;
printf("%d %d", *((char*)iPtr), *((char*)iPtr+1) );
}
Answer:
1 1
Explanation:
The integer value 257 is stored in the memory as, 00000001 00000001, so
the individual bytes are taken by casting it to char * and get printed.
---------------------------------------------------------------------------------------------------------------------------------------
149)
main()
{
int i = 258;
int *iPtr = &i;
printf("%d %d", *((char*)iPtr), *((char*)iPtr+1) );
}
Answer:
2 1
Explanation:
The integer value 257 can be represented in binary as, 00000001
00000001. Remember that the INTEL machines are  ̳small-endian‘
machines. Small-endian means that the lower order bytes are stored in the
higher memory addresses and the higher order bytes are stored in lower
addresses. The integer value 258 is stored in memory as: 00000001
00000010.
---------------------------------------------------------------------------------------------------------------------------------------
150)
main()
{
int i=300;
char *ptr = &i;
*++ptr=2;
printf("%d",i);
}
Answer:
556
Explanation:
The integer value 300 in binary notation is: 00000001 00101100. It is
stored in memory (small-endian) as: 00101100 00000001. Result of the
expression *++ptr = 2 makes the memory representation as: 00101100
00000010. So the integer corresponding to it is 00000010 00101100 =>
556.
---------------------------------------------------------------------------------------------------------------------------------------
151)
#include <stdio.h>
main()
{
char * str = "hello";
char * ptr = str;
char least = 127;
while (*ptr++)
least = (*ptr<least ) ?*ptr :least;
printf("%d",least);
}
Answer:
0
Explanation:
After  ̳ptr‘ reaches the end of the string the value pointed by  ̳str‘ is  ̳\0‘.
So the value of  ̳str‘ is less than that of  ̳least‘. So the value of  ̳least‘
finally is 0.
---------------------------------------------------------------------------------------------------------------------------------------
152) Declare an array of N pointers to functions returning pointers to functions
returning pointers to characters?
Answer:
(char*(*)( )) (*ptr[N])( );
---------------------------------------------------------------------------------------------------------------------------------------
153) main()
{
struct student
{
char name[30];
struct date dob;
}stud;
struct date
{
int day,month,year;
};
scanf("%s%d%d%d",
stud.rollno,
&student.dob.month,
&student.dob.year);
&student.dob.day,
}
Answer:
Compiler Error: Undefined structure date
Explanation:
Inside the struct definition of  ̳student‘ the member of type struct date is
given. The compiler doesn‘t have the definition of date structure (forward
reference is not allowed in C in this case) so it issues an error.
---------------------------------------------------------------------------------------------------------------------------------------
154)
main()
{
struct date;
struct student
{
char name[30];
struct date dob;
}stud;
struct date
{
int day,month,year;};
scanf("%s%d%d%d", stud.rollno, &student.dob.day, &student.dob.month,
&student.dob.year);
}
Answer:
Compiler Error: Undefined structure date
Explanation:
Only declaration of struct date is available inside the structure definition
of  ̳student‘ but to have a variable of type struct date the definition of the
structure is required.
---------------------------------------------------------------------------------------------------------------------------------------
155) There were 10 records stored in ―somefile.dat‖ but the following program printed 11 names. What went wrong?
void main()
{
struct student
{
char name[30], rollno[6];
}stud;
FILE *fp = fopen(―somefile.dat‖,‖r‖);
while(!feof(fp))
{
fread(&stud, sizeof(stud), 1 , fp);
puts(stud.name);
}
}
Explanation:
fread reads 10 records and prints the names successfully. It will
return EOF only when fread tries to read another record and fails
reading EOF (and returning EOF). So it prints the last record
again. After this only the condition feof(fp) becomes false, hence
comes out of the while loop.
---------------------------------------------------------------------------------------------------------------------------------------
156) Is there any difference between the two declarations,
1. int foo(int *arr[]) and
2. int foo(int *arr[2])
Answer:
No
Explanation:
Functions can only pass pointers and not arrays. The numbers that are
allowed inside the [] is just for more readability. So there is no difference
between the two declarations.
---------------------------------------------------------------------------------------------------------------------------------------
157) What is the subtle error in the following code segment?
void fun(int n, int arr[])
{
int *p=0;
int i=0;
while(i++<n)
p = &arr[i];
*p = 0;
}
Answer & Explanation:
If the body of the loop never executes p is assigned no address. So
p remains NULL where *p =0 may result in problem (may rise to
runtime error ―NULL pointer assignment‖ and terminate the
program).
---------------------------------------------------------------------------------------------------------------------------------------
158) What is wrong with the following code?
int *foo()
{
int *s = malloc(sizeof(int)100);
assert(s != NULL);
return s;
}
Answer & Explanation:
assert macro should be used for debugging and finding out bugs. The
check s != NULL is for error/exception handling and for that assert
shouldn‘t be used. A plain if and the corresponding remedy statement has
to be given.
---------------------------------------------------------------------------------------------------------------------------------------
159) What is the hidden bug with the following statement?
assert(val++ != 0);
Answer & Explanation:
Assert macro is used for debugging and removed in release version. In
assert, the experssion involves side-effects. So the behavior of the code
becomes different in case of debug version and the release version thus
leading to a subtle bug.
Rule to Remember:
Don‟t use expressions that have side-effects in assert statements.
---------------------------------------------------------------------------------------------------------------------------------------
160) void main()
{
int *i = 0x400; // i points to the address 400
*i = 0;
// set the value of memory location pointed by i;
}
Answer:
Undefined behavior
Explanation:
The second statement results in undefined behavior because it points to
some location whose value may not be available for modification. This
66type of pointer in which the non-availability of the implementation of the
referenced location is known as 'incomplete type'.
---------------------------------------------------------------------------------------------------------------------------------------

C Aptitude Part VI

Note : All the programs are tested under Turbo C/C++ compilers.
It is assumed that,
Programs run under DOS environment,
The underlying machine is an x86 system,
Program is compiled using Turbo C/C++ compiler.
The program output may depend on the information based on this assumptions
(for example sizeof(int) == 2 may be assumed).
---------------------------------------------------------------------------------------------------------------------------------------
Predict the output or error(s) for the following:
---------------------------------------------------------------------------------------------------------------------------------------
 91) In the following pgm add a stmt in the function fun such that the address of
'a' gets stored in 'j'.
main(){
int * j;
void fun(int **);
fun(&j);
}
void fun(int **k) {
int a =0;
/* add a stmt here*/
}
Answer:
*k = &a
Explanation:
The argument of the function is a pointer to a pointer.
---------------------------------------------------------------------------------------------------------------------------------------
92) What are the following notations of defining functions known as?
i.
int abc(int a,float b)
{
/* some code */
}
ii. int abc(a,b)
int a; float b;
{
/* some code*/
}
Answer:
i. ANSI C notation
ii. Kernighan & Ritche notation
---------------------------------------------------------------------------------------------------------------------------------------
93) main()
{
char *p;
p="%d\n";
p++;
p++;
printf(p-2,300);
}
Answer:
300
Explanation:
The pointer points to % since it is incremented twice and again
decremented by 2, it points to '%d\n' and 300 is printed.
---------------------------------------------------------------------------------------------------------------------------------------
94) main(){
char a[100];
a[0]='a';a[1]]='b';a[2]='c';a[4]='d';
abc(a);
}
abc(char a[]){
a++;
printf("%c",*a);
a++;
printf("%c",*a);
}
Explanation:
The base address is modified only in function and as a result a points to 'b'
then after incrementing to 'c' so bc will be printed.
---------------------------------------------------------------------------------------------------------------------------------------
95) func(a,b)
int a,b;
{
return( a= (a==b) );
}
main()
{
int process(),func();
printf("The value of process is %d !\n ",process(func,3,6));
}
process(pf,val1,val2)
int (*pf) ();
int val1,val2;
{
return((*pf) (val1,val2));
}
Answer:
The value if process is 0 !
Explanation:
The function 'process' has 3 parameters - 1, a pointer to another function 2
and 3, integers. When this function is invoked from main, the following
substitutions for formal parameters take place: func for pf, 3 for val1 and 6
for val2. This function returns the result of the operation performed by the
function 'func'. The function func has two integer parameters. The formal
parameters are substituted as 3 for a and 6 for b. since 3 is not equal to 6,
a==b returns 0. therefore the function returns 0 which in turn is returned
by the function 'process'.
---------------------------------------------------------------------------------------------------------------------------------------
96) void main()
{
static int i=5;
if(--i){
main();
printf("%d ",i);
}
}
Answer:
0 0 0 0
Explanation:
The variable "I" is declared as static, hence memory for I will be allocated
for only once, as it encounters the statement. The function main() will be called
recursively unless I becomes equal to 0, and since main() is recursively called, so
the value of static I ie., 0 will be printed every time the control is returned.
---------------------------------------------------------------------------------------------------------------------------------------
97) void main()
{
int k=ret(sizeof(float));
printf("\n here value is %d",++k);
}
int ret(int ret)
{
ret += 2.5;
return(ret);
}
Answer:
Here value is 7
Explanation:
The int ret(int ret), ie., the function name and the argument name can be
the same.
Firstly, the function ret() is called in which the sizeof(float) ie., 4 is
passed, after the first expression the value in ret will be 6, as ret is integer hence
the value stored in ret will have implicit type conversion from float to int. The ret
is returned in main() it is printed after and preincrement.
---------------------------------------------------------------------------------------------------------------------------------------
98) void main()
{
char a[]="12345\0";
int i=strlen(a);
printf("here in 3 %d\n",++i);
}
Answer:
here in 3 6
Explanation:
The char array 'a' will hold the initialized string, whose length will be
counted from 0 till the null character. Hence the 'I' will hold the value equal to 5,
after the pre-increment in the printf statement, the 6 will be printed.
---------------------------------------------------------------------------------------------------------------------------------------
99) void main()
{
unsigned giveit=-1;
int gotit;
printf("%u ",++giveit);
printf("%u \n",gotit=--giveit);
}
Answer:
0 65535
---------------------------------------------------------------------------------------------------------------------------------------
100) void main()
{
int i;
char a[]="\0";
if(printf("%s\n",a))
printf("Ok here \n");
else
printf("Forget it\n");
}
Answer:
Ok here
Explanation:
Printf will return how many characters does it print. Hence printing
a null character returns 1 which makes the if statement true, thus
"Ok here" is printed.
 ---------------------------------------------------------------------------------------------------------------------------------------
101) void main()
{
void *v;
int integer=2;
int *i=&integer;
v=i;
printf("%d",(int*)*v);
}
Answer:
Compiler Error. We cannot apply indirection on type void*.
Explanation:
Void pointer is a generic pointer type. No pointer arithmetic can be
done on it. Void pointers are normally used for,
1. Passing generic pointers to functions and returning such pointers.
2. As a intermediate pointer type.
3. Used when the exact pointer type will be known at a later point of
time.
---------------------------------------------------------------------------------------------------------------------------------------
102) void main()
{
int i=i++,j=j++,k=k++;
printf(―%d%d%d‖,i,j,k);
}
Answer:
Garbage values.
Explanation:
An identifier is available to use in program code from the point of its
declaration.
So expressions such as i = i++ are valid statements. The i, j and k are
automatic variables and so they contain some garbage value. Garbage in is
garbage out (GIGO).
---------------------------------------------------------------------------------------------------------------------------------------
103) void main()
{
static int i=i++, j=j++, k=k++;
printf(―i = %d j = %d k = %d‖, i, j, k);
}
Answer:
i = 1 j = 1 k = 1
Explanation:
Since static variables are initialized to zero by default.
---------------------------------------------------------------------------------------------------------------------------------------
104) void main()
{
while(1){
if(printf("%d",printf("%d")))
break;
else
continue;
}
}
Answer:
Garbage values
Explanation:
The inner printf executes first to print some garbage value. The printf
returns no of characters printed and this value also cannot be predicted.
Still the outer printf prints something and so returns a non-zero value. So
it encounters the break statement and comes out of the while statement.
---------------------------------------------------------------------------------------------------------------------------------------
104)
main()
{
unsigned int i=10;
while(i-->=0)
printf("%u ",i);
}
Answer:
10 9 8 7 6 5 4 3 2 1 0 65535 65534.....
Explanation:
Since i is an unsigned integer it can never become negative. So the
expression i-- >=0 will always be true, leading to an infinite loop.
---------------------------------------------------------------------------------------------------------------------------------------
105) #include<conio.h>
main()
{
int x,y=2,z,a;
if(x=y%2) z=2;
a=2;
printf("%d %d ",z,x);
}
Answer:
Garbage-value 0
Explanation:
The value of y%2 is 0. This value is assigned to x. The condition reduces
to if (x) or in other words if(0) and so z goes uninitialized.
Thumb Rule: Check all control paths to write bug free code.
---------------------------------------------------------------------------------------------------------------------------------------
106) main()
{
int a[10];
printf("%d",*a+1-*a+3);
}
Answer:
4
Explanation:
*a and -*a cancels out. The result is as simple as 1 + 3 = 4 !
---------------------------------------------------------------------------------------------------------------------------------------
107) #define prod(a,b) a*b
main()
{
int x=3,y=4;
printf("%d",prod(x+2,y-1));
}
Answer:
10
Explanation:
The macro expands and evaluates to as:
x+2*y-1 => x+(2*y)-1 => 10
---------------------------------------------------------------------------------------------------------------------------------------
108) main()
{
unsigned int i=65000;
while(i++!=0);
printf("%d",i);
}
Answer:
1
Explanation:
Note the semicolon after the while statement. When the value of i
becomes 0 it comes out of while loop. Due to post-increment on i the
value of i while printing is 1.
---------------------------------------------------------------------------------------------------------------------------------------
109)
main()
{
int i=0;
while(+(+i--)!=0)
i-=i++;
printf("%d",i);
}
Answer:
-1
Explanation:
Unary + is the only dummy operator in C. So it has no effect on the
expression and now the while loop is,
while(i--!=0) which is false
and so breaks out of while loop. The value –1 is printed due to the post-
decrement operator.
---------------------------------------------------------------------------------------------------------------------------------------
113)
main()
{
float f=5,g=10;
enum{i=10,j=20,k=50};
printf("%d\n",++k);
printf("%f\n",f<<2);
printf("%lf\n",f%g);
printf("%lf\n",fmod(f,g));
}
Answer:
Line no 5: Error: Lvalue required
Line no 6: Cannot apply leftshift to float
Line no 7: Cannot apply mod to float
Explanation:
Enumeration constants cannot be modified, so you cannot apply ++.
Bit-wise operators and % operators cannot be applied on float values.
fmod() is to find the modulus values for floats as % operator is for ints.
---------------------------------------------------------------------------------------------------------------------------------------
110)
main()
{
int i=10;
void pascal f(int,int,int);
f(i++,i++,i++);
printf(" %d",i);
}
void pascal f(integer :i,integer:j,integer :k)
{
write(i,j,k);
}
Answer:
Compiler error: unknown type integer
Compiler error: undeclared function write
Explanation:
Pascal keyword doesn‘t mean that pascal code can be used. It means that
the function follows Pascal argument passing mechanism in calling the functions.
---------------------------------------------------------------------------------------------------------------------------------------
111)
void pascal f(int i,int j,int k)
{
printf(―%d %d %d‖,i, j, k);
}
void cdecl f(int i,int j,int k)
{
printf(―%d %d %d‖,i, j, k);
}
main()
48{
int i=10;
f(i++,i++,i++);
printf(" %d\n",i);
i=10;
f(i++,i++,i++);
printf(" %d",i);
}
Answer:
10 11 12 13
12 11 10 13
Explanation:
Pascal argument passing mechanism forces the arguments to be called
from left to right. cdecl is the normal C argument passing mechanism where the
arguments are passed from right to left.
---------------------------------------------------------------------------------------------------------------------------------------
112)What is the output of the program given below
main()
{
signed char i=0;
for(;i>=0;i++) ;
printf("%d\n",i);
}
Answer
-128
Explanation
Notice the semicolon at the end of the for loop. THe initial value of
the i is set to 0. The inner loop executes to increment the value
from 0 to 127 (the positive range of char) and then it rotates to the
negative value of -128. The condition in the for loop fails and so
comes out of the for loop. It prints the current value of i that is -128.
---------------------------------------------------------------------------------------------------------------------------------------
113) main()
{
unsigned char i=0;
for(;i>=0;i++) ;
printf("%d\n",i);
}
Answer
infinite loop
Explanation
The difference between the previous question and this one is that the char
is declared to be unsigned. So the i++ can never yield negative value and i>=0
never becomes false so that it can come out of the for loop.
 ---------------------------------------------------------------------------------------------------------------------------------------
114) main()
{
char i=0;
for(;i>=0;i++) ;
printf("%d\n",i);
}
Answer:
Behavior is implementation dependent.
Explanation:
The detail if the char is signed/unsigned by default is
implementation dependent. If the implementation treats the char to be
signed by default the program will print –128 and terminate. On the other
hand if it considers char to be unsigned by default, it goes to infinite loop.
Rule:
You can write programs that have implementation dependent
behavior. But dont write programs that depend on such behavior.
---------------------------------------------------------------------------------------------------------------------------------------
115) Is the following statement a declaration/definition. Find what does it mean?
int (*x)[10];
Answer
Definition.
x is a pointer to array of(size 10) integers.
Apply clock-wise rule to find the meaning of this definition.
---------------------------------------------------------------------------------------------------------------------------------------
116). What is the output for the program given below
typedef enum errorType{warning, error, exception,}error;
main()
{
error g1;
g1=1;
printf("%d",g1);
}
Answer
Compiler error: Multiple declaration for error
Explanation
The name error is used in the two meanings. One means that it is a
enumerator constant with value 1. The another use is that it is a type name
(due to typedef) for enum errorType. Given a situation the compiler
cannot distinguish the meaning of error to know in what sense the error is
used:
error g1;
g1=error;
// which error it refers in each case?
When the compiler can distinguish between usages then it will not
issue error (in pure technical terms, names can only be overloaded in
different namespaces).
Note: the extra comma in the declaration,
enum errorType{warning, error, exception,}
is not an error. An extra comma is valid and is provided just for
programmer‘s convenience.
---------------------------------------------------------------------------------------------------------------------------------------
117)
typedef struct error{int warning, error, exception;}error;
main()
{
error g1;
g1.error =1;
printf("%d",g1.error);
}
Answer
1
Explanation
The three usages of name errors can be distinguishable by the compiler at
any instance, so valid (they are in different namespaces).
Typedef struct error{int warning, error, exception;}error;
This error can be used only by preceding the error by struct kayword as in:
struct error someError;
typedef struct error{int warning, error, exception;}error;
This can be used only after . (dot) or -> (arrow) operator preceded by the variable
name as in :
g1.error =1;
printf("%d",g1.error);
typedef struct error{int warning, error, exception;}error;
This can be used to define variables without using the preceding struct keyword
as in:
error g1;
Since the compiler can perfectly distinguish between these three usages, it is
perfectly legal and valid.
Note
This code is given here to just explain the concept behind. In real
programming don‘t use such overloading of names. It reduces the readability of
the code. Possible doesn‘t mean that we should use it!
---------------------------------------------------------------------------------------------------------------------------------------
118)
#ifdef something
int some=0;
#endif
main()
{
int thing = 0;
printf("%d %d\n", some ,thing);
}
Answer:
Compiler error : undefined symbol some
Explanation:
This is a very simple example for conditional compilation. The
name something is not already known to the compiler making the
declaration
int some = 0;
effectively removed from the source code.
---------------------------------------------------------------------------------------------------------------------------------------
119)
#if something == 0
int some=0;
#endif
main()
{
int thing = 0;
printf("%d %d\n", some ,thing);
}
Answer
0 0
Explanation
This code is to show that preprocessor expressions are not the
same as the ordinary expressions. If a name is not known the
preprocessor treats it to be equal to zero.
---------------------------------------------------------------------------------------------------------------------------------------
120). What is the output for the following program
main()
{
int arr2D[3][3];
printf("%d\n", ((arr2D==* arr2D)&&(* arr2D == arr2D[0])) );
}
Answer
1
Explanation
This is due to the close relation between the arrays and pointers. N
dimensional arrays are made up of (N-1) dimensional arrays.
52arr2D is made up of a 3 single arrays that contains 3 integers each .
arr2D
arr2D[1]
arr2D[2]
arr2D[3]
The name arr2D refers to the beginning of all the 3 arrays. *arr2D
refers to the start of the first 1D array (of 3 integers) that is the
same address as arr2D. So the expression (arr2D == *arr2D) is true
(1).
Similarly, *arr2D is nothing but *(arr2D + 0), adding a zero
doesn‘t change the value/meaning. Again arr2D[0] is the another
way of telling *(arr2D + 0). So the expression (*(arr2D + 0) ==
arr2D[0]) is true (1).
Since both parts of the expression evaluates to true the result is
true(1) and the same is printed.
---------------------------------------------------------------------------------------------------------------------------------------
121) void main()
{
if(~0 == (unsigned int)-1)
printf(―You can answer this if you know how values are represented in
memory‖);
}
Answer
You can answer this if you know how values are represented in
memory
Explanation
~ (tilde operator or bit-wise negation operator) operates on 0 to
produce all ones to fill the space for an integer. –1 is represented in
unsigned value as all 1‘s and so both are equal.
---------------------------------------------------------------------------------------------------------------------------------------
122) int swap(int *a,int *b)
{
*a=*a+*b;*b=*a-*b;*a=*a-*b;
}
main()
{
int x=10,y=20;
swap(&x,&y);
printf("x= %d y = %d\n",x,y);
}
Answer
x = 20 y = 10
Explanation
This is one way of swapping two values. Simple checking will help
understand this.
---------------------------------------------------------------------------------------------------------------------------------------
123) main()
{
char *p = ―ayqm‖;
printf(―%c‖,++*(p++));
}
Answer:
b
---------------------------------------------------------------------------------------------------------------------------------------
124) main()
{
int i=5;
printf("%d",++i++);
}
Answer:
Compiler error: Lvalue required in function main
Explanation:
++i yields an rvalue. For postfix ++ to operate an lvalue is
required.
---------------------------------------------------------------------------------------------------------------------------------------
125)
main()
{
char *p = ―ayqm‖;
char c;
c = ++*p++;
printf(―%c‖,c);
}
Answer:
b
Explanation:
There is no difference between the expression ++*(p++) and
++*p++. Parenthesis just works as a visual clue for the reader to
see which expression is first evaluated.
---------------------------------------------------------------------------------------------------------------------------------------

C Aptitude Part V

Note : All the programs are tested under Turbo C/C++ compilers.
It is assumed that,
Programs run under DOS environment,
The underlying machine is an x86 system,
Program is compiled using Turbo C/C++ compiler.
The program output may depend on the information based on this assumptions
(for example sizeof(int) == 2 may be assumed).
---------------------------------------------------------------------------------------------------------------------------------------
Predict the output or error(s) for the following:
---------------------------------------------------------------------------------------------------------------------------------------

66) main()
{
int y;
scanf("%d",&y); // input given is 2000
if( (y%4==0 && y%100 != 0) || y%100 == 0 )
printf("%d is a leap year");
else
printf("%d is not a leap year");
}
Answer:
2000 is a leap year
Explanation:
An ordinary program to check if leap year or not.
---------------------------------------------------------------------------------------------------------------------------------------
67) #define max 5
#define int arr1[max]
main()
{
typedef char arr2[max];
arr1 list={0,1,2,3,4};
arr2 name="name";
printf("%d %s",list[0],name);
}
Answer:
Compiler error (in the line arr1 list = {0,1,2,3,4})
Explanation:
arr2 is declared of type array of size 5 of characters. So it can be used to
declare the variable name of the type arr2. But it is not the case of arr1.
Hence an error.
Rule of Thumb:
#defines are used for textual replacement whereas typedefs are used for
declaring new types.
---------------------------------------------------------------------------------------------------------------------------------------
68) int i=10;
main()
{
extern int i;
{
int i=20;
{
const volatile unsigned i=30;
printf("%d",i);
}
printf("%d",i);
}
printf("%d",i);
}
Answer:
30,20,10
Explanation:
'{' introduces new block and thus new scope. In the innermost block i is
declared as,
const volatile unsigned
which is a valid declaration. i is assumed of type int. So printf prints 30. In
the next block, i has value 20 and so printf prints 20. In the outermost
block, i is declared as extern, so no storage space is allocated for it. After
compilation is over the linker resolves it to global variable i (since it is the
only variable visible there). So it prints i's value as 10.
---------------------------------------------------------------------------------------------------------------------------------------

69) main()
{
int *j;
{
int i=10;
j=&i;
}
printf("%d",*j);
}
Answer:
10
Explanation:
The variable i is a block level variable and the visibility is inside that
block only. But the lifetime of i is lifetime of the function so it lives upto
the exit of main function. Since the i is still allocated space, *j prints the
value stored in i since j points i.
---------------------------------------------------------------------------------------------------------------------------------------
70) main()
{
int i=-1;
-i;
printf("i = %d, -i = %d \n",i,-i);
}
Answer:
i = -1, -i = 1
Explanation:
-i is executed and this execution doesn't affect the value of i. In printf first
you just print the value of i. After that the value of the expression -i = -(-1)
is printed.
---------------------------------------------------------------------------------------------------------------------------------------
71) #include<stdio.h>
main()
{
const int i=4;
float j;
j = ++i;
printf("%d %f", i,++j);
}
Answer:
Compiler error
Explanation:
i is a constant. you cannot change the value of constant
---------------------------------------------------------------------------------------------------------------------------------------
72) #include<stdio.h>
main()
{
int a[2][2][2] = { {10,2,3,4}, {5,6,7,8} };
int *p,*q;
p=&a[2][2][2];
*q=***a;
printf("%d..%d",*p,*q);
}
Answer:
garbagevalue..1
Explanation:
p=&a[2][2][2] you declare only two 2D arrays. but you are trying to
access the third 2D(which you are not declared) it will print garbage
values. *q=***a starting address of a is assigned integer pointer. now q is
pointing to starting address of a.if you print *q meAnswer:it will print first
element of 3D array.
---------------------------------------------------------------------------------------------------------------------------------------
73) #include<stdio.h>
main()
{
register i=5;
char j[]= "hello";
printf("%s %d",j,i);
}
Answer:
hello 5
Explanation:
if you declare i as register compiler will treat it as ordinary integer and it
will take integer value. i value may be stored either in register or in
memory.
---------------------------------------------------------------------------------------------------------------------------------------
74) main()
{
int i=5,j=6,z;
printf("%d",i+++j);
}
Answer:
11
Explanation:
the expression i+++j is treated as (i++ + j)
---------------------------------------------------------------------------------------------------------------------------------------
76) struct aaa{
struct aaa *prev;
int i;
struct aaa *next;
};
main()
{
struct aaa abc,def,ghi,jkl;
int x=100;
abc.i=0;abc.prev=&jkl;
abc.next=&def;
def.i=1;def.prev=&abc;def.next=&ghi;
ghi.i=2;ghi.prev=&def;
ghi.next=&jkl;
jkl.i=3;jkl.prev=&ghi;jkl.next=&abc;
x=abc.next->next->prev->next->i;
printf("%d",x);
}
Answer:
2
Explanation:
above all statements form a double circular linked list;
abc.next->next->prev->next->i
this one points to "ghi" node the value of at particular node is 2.
---------------------------------------------------------------------------------------------------------------------------------------
77) struct point
{
int x;
int y;
};
struct point origin,*pp;
main()
{
pp=&origin;
printf("origin is(%d%d)\n",(*pp).x,(*pp).y);
printf("origin is (%d%d)\n",pp->x,pp->y);
}
Answer:
origin is(0,0)
origin is(0,0)
Explanation:
pp is a pointer to structure. we can access the elements of the structure
either with arrow mark or with indirection operator.
Note:
Since structure point is globally declared x & y are initialized as zeroes
---------------------------------------------------------------------------------------------------------------------------------------
78) main()
{
int i=_l_abc(10);
printf("%d\n",--i);
}
int _l_abc(int i)
{
return(i++);
}
Answer:
9
Explanation:
return(i++) it will first return i and then increments. i.e. 10 will be
returned.
---------------------------------------------------------------------------------------------------------------------------------------  
79) main()
{
char *p;
int *q;
long *r;
p=q=r=0;
p++;
q++;
r++;
printf("%p...%p...%p",p,q,r);
}
Answer:
0001...0002...0004
Explanation:
++ operator when applied to pointers increments address according to
their corresponding data-types.
---------------------------------------------------------------------------------------------------------------------------------------
80) main()
{
char c=' ',x,convert(z);
getc(c);
37if((c>='a') && (c<='z'))
x=convert(c);
printf("%c",x);
}
convert(z)
{
return z-32;
}
Answer:
Compiler error
Explanation:
declaration of convert and format of getc() are wrong.
---------------------------------------------------------------------------------------------------------------------------------------
81) main(int argc, char **argv)
{
printf("enter the character");
getchar();
sum(argv[1],argv[2]);
}
sum(num1,num2)
int num1,num2;
{
return num1+num2;
}
Answer:
Compiler error.
Explanation:
argv[1] & argv[2] are strings. They are passed to the function sum without
converting it to integer values.
---------------------------------------------------------------------------------------------------------------------------------------
82) # include <stdio.h>
int one_d[]={1,2,3};
main()
{
int *ptr;
ptr=one_d;
ptr+=3;
printf("%d",*ptr);
}
Answer:
garbage value
Explanation:
ptr pointer is pointing to out of the array range of one_d.
---------------------------------------------------------------------------------------------------------------------------------------
83) # include<stdio.h>
aaa() {printf("hi");
}
bbb(){
printf("hello");
}
ccc(){
printf("bye");
}
main()
{
int (*ptr[3])();
ptr[0]=aaa;
ptr[1]=bbb;
ptr[2]=ccc;
ptr[2]();
}
Answer:
bye
Explanation:
ptr is array of pointers to functions of return type int.ptr[0] is assigned to
address of the function aaa. Similarly ptr[1] and ptr[2] for bbb and ccc
respectively. ptr[2]() is in effect of writing ccc(), since ptr[2] points to ccc.
---------------------------------------------------------------------------------------------------------------------------------------
85) #include<stdio.h>
main()
{
FILE *ptr;
char i;
ptr=fopen("zzz.c","r");
while((i=fgetch(ptr))!=EOF)
printf("%c",i);
}
Answer:
contents of zzz.c followed by an infinite loop
Explanation:
The condition is checked against EOF, it should be checked against
NULL.
---------------------------------------------------------------------------------------------------------------------------------------
86) main()
{
int i =0;j=0;
if(i && j++)
printf("%d..%d",i++,j);
printf("%d..%d,i,j);
}
Answer:
390..0
Explanation:
The value of i is 0. Since this information is enough to determine the truth
value of the boolean expression. So the statement following the if
statement is not executed. The values of i and j remain unchanged and get
printed.
---------------------------------------------------------------------------------------------------------------------------------------
87) main()
{
int i;
i = abc();
printf("%d",i);
}
abc()
{
_AX = 1000;
}
Answer:
1000
Explanation:
Normally the return value from the function is through the information
from the accumulator. Here _AH is the pseudo global variable denoting
the accumulator. Hence, the value of the accumulator is set 1000 so the
function returns value 1000.
---------------------------------------------------------------------------------------------------------------------------------------
88) int i;
main(){
int t;
for ( t=4;scanf("%d",&i)-t;printf("%d\n",i))
printf("%d--",t--);
}
// If the inputs are 0,1,2,3 find the o/p
Answer:
4--0
3--1
2--2
Explanation:
Let us assume some x= scanf("%d",&i)-t the values during execution
will be,
t
i
x
4
0
-4
3
1
-2
2
2
0
---------------------------------------------------------------------------------------------------------------------------------------
89) main(){
int a= 0;int b = 20;char x =1;char y =10;
40if(a,b,x,y)
printf("hello");
}
Answer:
hello
Explanation:
The comma operator has associativity from left to right. Only the
rightmost value is returned and the other values are evaluated and ignored.
Thus the value of last variable y is returned to check in if. Since it is a non
zero value if becomes true so, "hello" will be printed.
---------------------------------------------------------------------------------------------------------------------------------------
90) main(){
unsigned int i;
for(i=1;i>-2;i--)
printf("c aptitude");
}
Explanation:
i is an unsigned integer. It is compared with a signed value. Since the both
types doesn't match, signed is promoted to unsigned value. The unsigned
equivalent of -2 is a huge value so condition becomes false and control
comes out of the loop.
---------------------------------------------------------------------------------------------------------------------------------------

C Aptitude Part IV

Note : All the programs are tested under Turbo C/C++ compilers.
It is assumed that,
Programs run under DOS environment,
The underlying machine is an x86 system,
Program is compiled using Turbo C/C++ compiler.
The program output may depend on the information based on this assumptions
(for example sizeof(int) == 2 may be assumed).
---------------------------------------------------------------------------------------------------------------------------------------
Predict the output or error(s) for the following:
---------------------------------------------------------------------------------------------------------------------------------------  
46) main()
{
show();
}
void show()
{
printf("I'm the greatest");
}
Answer:
Compier error: Type mismatch in redeclaration of show.
Explanation:
When the compiler sees the function show it doesn't know anything about
it. So the default return type (ie, int) is assumed. But when compiler sees
the actual definition of show mismatch occurs since it is declared as void.
Hence the error.
The solutions are as follows:
1. declare void show() in main() .
2. define show() before main().
3. declare extern void show() before the use of show().
---------------------------------------------------------------------------------------------------------------------------------------
47) main( )
{
int a[2][3][2] = {{{2,4},{7,8},{3,4}},{{2,2},{2,3},{3,4}}};
printf(―%u %u %u %d \n‖,a,*a,**a,***a);
printf(―%u %u %u %d \n‖,a+1,*a+1,**a+1,***a+1);
}
Answer:
100, 100, 100, 2
114, 104, 102, 3
Explanation:
The given array is a 3-D one. It can also be viewed as a 1-D array.
2 4
7 8 3
4 2
2 2
3
3
4
100 102 104 106 108 110 112 114 116 118 120 122
thus, for the first printf statement a, *a, **a give address of first element .
since the indirection ***a gives the value. Hence, the first line of the
output.
for the second printf a+1 increases in the third dimension thus points to
value at 114, *a+1 increments in second dimension thus points to 104, **a
+1 increments the first dimension thus points to 102 and ***a+1 first gets
the value at first location and then increments it by 1. Hence, the output.
---------------------------------------------------------------------------------------------------------------------------------------
48) main( )
{
int a[ ] = {10,20,30,40,50},j,*p;
for(j=0; j<5; j++)
{
printf(―%d‖ ,*a);
a++;
}
p = a;
for(j=0; j<5; j++)
{
printf(―%d ‖ ,*p);
p++;
}
}
Answer:
Compiler error: lvalue required.
Explanation:
Error is in line with statement a++. The operand must be an lvalue and
may be of any of scalar type for the any operator, array name only when
subscripted is an lvalue. Simply array name is a non-modifiable lvalue.
---------------------------------------------------------------------------------------------------------------------------------------
49) main( )
{
static int a[ ] = {0,1,2,3,4};
int *p[ ] = {a,a+1,a+2,a+3,a+4};
int **ptr = p;
ptr++;
printf(―\n %d %d %d‖, ptr-p, *ptr-a, **ptr);
*ptr++;
printf(―\n %d %d %d‖, ptr-p, *ptr-a, **ptr);
*++ptr;
printf(―\n %d %d %d‖, ptr-p, *ptr-a, **ptr);
++*ptr;
printf(―\n %d %d %d‖, ptr-p, *ptr-a, **ptr);
}
Answer:
111
222
333
344
Explanation:
Let us consider the array and the two pointers with some address
a
260
100
1
102
2
104
3
106
4
108
p
100
102
104
106
108
1000 1002 1004 1006 1008
ptr
1000
2000
After execution of the instruction ptr++ value in ptr becomes 1002, if
scaling factor for integer is 2 bytes. Now ptr – p is value in ptr – starting
location of array p, (1002 – 1000) / (scaling factor) = 1, *ptr – a = value at
address pointed by ptr – starting value of array a, 1002 has a value 102 so
the value is (102 – 100)/(scaling factor) = 1, **ptr is the value stored in
the location pointed by the pointer of ptr = value pointed by value pointed
by 1002 = value pointed by 102 = 1. Hence the output of the firs printf is
1, 1, 1.
After execution of *ptr++ increments value of the value in ptr by scaling
factor, so it becomes1004. Hence, the outputs for the second printf are ptr
– p = 2, *ptr – a = 2, **ptr = 2.
After execution of *++ptr increments value of the value in ptr by scaling
factor, so it becomes1004. Hence, the outputs for the third printf are ptr –
p = 3, *ptr – a = 3, **ptr = 3.
After execution of ++*ptr value in ptr remains the same, the value pointed
by the value is incremented by the scaling factor. So the value in array p at
location 1006 changes from 106 10 108,. Hence, the outputs for the fourth
printf are ptr – p = 1006 – 1000 = 3, *ptr – a = 108 – 100 = 4, **ptr = 4.
---------------------------------------------------------------------------------------------------------------------------------------
50) main( )
{
char *q;
int j;
for (j=0; j<3; j++) scanf(―%s‖ ,(q+j));
for (j=0; j<3; j++) printf(―%c‖ ,*(q+j));
for (j=0; j<3; j++) printf(―%s‖ ,(q+j));
}
Explanation:
Here we have only one pointer to type char and since we take input in the
same pointer thus we keep writing over in the same location, each time
shifting the pointer value by 1. Suppose the inputs are MOUSE, TRACK
and VIRTUAL. Then for the first input suppose the pointer starts at
location 100 then the input one is stored as
M
O
U
S
E
\0
When the second input is given the pointer is incremented as j value
becomes 1, so the input is filled in memory starting from 101.
M
T
R
A
C
K
\0
The third input starts filling from the location 102
27M
T
V
I
R
T
U
A
L
\0
This is the final value stored .
The first printf prints the values at the position q, q+1 and q+2 = M T V
The second printf prints three strings starting from locations q, q+1, q+2
i.e MTVIRTUAL, TVIRTUAL and VIRTUAL.
---------------------------------------------------------------------------------------------------------------------------------------
51) main( )
{
void *vp;
char ch =  ̳g‘, *cp = ―goofy‖;
int j = 20;
vp = &ch;
printf(―%c‖, *(char *)vp);
vp = &j;
printf(―%d‖,*(int *)vp);
vp = cp;
printf(―%s‖,(char *)vp + 3);
}
Answer:
g20fy
Explanation:
Since a void pointer is used it can be type casted to any other type pointer.
vp = &ch stores address of char ch and the next statement prints the value
stored in vp after type casting it to the proper data type pointer. the output
is  ̳g‘. Similarly the output from second printf is  ̳20‘. The third printf
statement type casts it to print the string from the 4 th value hence the
output is  ̳fy‘.
---------------------------------------------------------------------------------------------------------------------------------------
52) main ( )
{
static char *s[ ] = {―black‖, ―white‖, ―yellow‖, ―violet‖};
char **ptr[ ] = {s+3, s+2, s+1, s}, ***p;
p = ptr;
**++p;
printf(―%s‖,*--*++p + 3);
}
Answer:
ck
Explanation:
In this problem we have an array of char pointers pointing to start of 4
strings. Then we have ptr which is a pointer to a pointer of type char and a
variable p which is a pointer to a pointer to a pointer of type char. p hold
the initial value of ptr, i.e. p = s+3. The next statement increment value in
p by 1 , thus now value of p = s+2. In the printf statement the expression
is evaluated *++p causes gets value s+1 then the pre decrement is
executed and we get s+1 – 1 = s . the indirection operator now gets the
28value from the array of s and adds 3 to the starting address. The string is
printed starting from this position. Thus, the output is  ̳ck‘.
---------------------------------------------------------------------------------------------------------------------------------------
53)
main()
{
int i, n;
char *x = ―girl‖;
n = strlen(x);
*x = x[n];
for(i=0; i<n; ++i)
{
printf(―%s\n‖,x);
x++;
}
}
Answer:
(blank space)
irl
rl
l
Explanation:
Here a string (a pointer to char) is initialized with a value ―girl‖. The
strlen function returns the length of the string, thus n has a value 4. The
next statement assigns value at the nth location ( ̳\0‘) to the first location.
Now the string becomes ―\0irl‖ . Now the printf statement prints the string
after each iteration it increments it starting position. Loop starts from 0 to
4. The first time x[0] =  ̳\0‘ hence it prints nothing and pointer value is
incremented. The second time it prints from x[1] i.e ―irl‖ and the third
time it prints ―rl‖ and the last time it prints ―l‖ and the loop terminates.
---------------------------------------------------------------------------------------------------------------------------------------
54) int i,j;
for(i=0;i<=10;i++)
{
j+=5;
assert(i<5);
}
Answer:
Runtime error: Abnormal program termination.
assert failed (i<5), <file name>,<line number>
Explanation:
asserts are used during debugging to make sure that certain conditions are
satisfied. If assertion fails, the program will terminate reporting the same.
After debugging use,
#undef NDEBUG
and this will disable all the assertions from the source code. Assertion
is a good debugging tool to make use of.
---------------------------------------------------------------------------------------------------------------------------------------
55) main()
{
int i=-1;
+i;
printf("i = %d, +i = %d \n",i,+i);
}
Answer:
i = -1, +i = -1
Explanation:
Unary + is the only dummy operator in C. Where-ever it comes you can
just ignore it just because it has no effect in the expressions (hence the
name dummy operator).
56) What are the files which are automatically opened when a C file is executed?
Answer:
stdin, stdout, stderr (standard input,standard output,standard error).
---------------------------------------------------------------------------------------------------------------------------------------
57) what will be the position of the file marker?
a: fseek(ptr,0,SEEK_SET);
b: fseek(ptr,0,SEEK_CUR);
Answer :
a: The SEEK_SET sets the file position marker to the starting of the file.
b: The SEEK_CUR sets the file position marker to the current position
of the file.
---------------------------------------------------------------------------------------------------------------------------------------
58) main()
{
char name[10],s[12];
scanf(" \"%[^\"]\"",s);
}
How scanf will execute?
Answer:
First it checks for the leading white space and discards it.Then it matches
with a quotation mark and then it reads all character upto another
quotation mark.
---------------------------------------------------------------------------------------------------------------------------------------
59) What is the problem with the following code segment?
while ((fgets(receiving array,50,file_ptr)) != EOF)
;
Answer & Explanation:
fgets returns a pointer. So the correct end of file check is checking for !=
NULL.
---------------------------------------------------------------------------------------------------------------------------------------
60) main()
{
main();
}
Answer:
Runtime error : Stack overflow.
Explanation:
main function calls itself again and again. Each time the function is called
its return address is stored in the call stack. Since there is no condition to
terminate the function call, the call stack overflows at runtime. So it
terminates the program and results in an error.
---------------------------------------------------------------------------------------------------------------------------------------
61) main()
{
char *cptr,c;
void *vptr,v;
c=10; v=0;
cptr=&c; vptr=&v;
printf("%c%v",c,v);
}
Answer:
Compiler error (at line number 4): size of v is Unknown.
Explanation:
You can create a variable of type void * but not of type void, since void is
an empty type. In the second line you are creating variable vptr of type
void * and v of type void hence an error.
---------------------------------------------------------------------------------------------------------------------------------------
62) main()
{
char *str1="abcd";
char str2[]="abcd";
printf("%d %d %d",sizeof(str1),sizeof(str2),sizeof("abcd"));
}
Answer:
2 5 5
Explanation:
In first sizeof, str1 is a character pointer so it gives you the size of the
pointer variable. In second sizeof the name str2 indicates the name of the
array whose size is 5 (including the '\0' termination character). The third
sizeof is similar to the second one.
---------------------------------------------------------------------------------------------------------------------------------------
63) main()
{
char not;
not=!2;
printf("%d",not);
}
Answer:
0
Explanation:
! is a logical operator. In C the value 0 is considered to be the boolean
value FALSE, and any non-zero value is considered to be the boolean
value TRUE. Here 2 is a non-zero value so TRUE. !TRUE is FALSE (0)
so it prints 0.
---------------------------------------------------------------------------------------------------------------------------------------
64) #define FALSE -1
#define TRUE 1
#define NULL 0
main() {
if(NULL)
puts("NULL");
else if(FALSE)
puts("TRUE");
else
puts("FALSE");
}
Answer:
TRUE
Explanation:
The input program to the compiler after processing by the preprocessor is,
main(){
if(0)
puts("NULL");
else if(-1)
puts("TRUE");
else
puts("FALSE");
}
Preprocessor doesn't replace the values given inside the double quotes.
The check by if condition is boolean value false so it goes to else. In
second if -1 is boolean value true hence "TRUE" is printed.
---------------------------------------------------------------------------------------------------------------------------------------
65) main()
{
int k=1;
printf("%d==1 is ""%s",k,k==1?"TRUE":"FALSE");
}
Answer:
1==1 is TRUE
Explanation:
When two strings are placed together (or separated by white-space) they
are concatenated (this is called as "stringization" operation). So the string
32is as if it is given as "%d==1 is %s". The conditional operator( ?: )
evaluates to "TRUE".
---------------------------------------------------------------------------------------------------------------------------------------