C Aptitude Part VI

Note : All the programs are tested under Turbo C/C++ compilers.
It is assumed that,
Programs run under DOS environment,
The underlying machine is an x86 system,
Program is compiled using Turbo C/C++ compiler.
The program output may depend on the information based on this assumptions
(for example sizeof(int) == 2 may be assumed).
---------------------------------------------------------------------------------------------------------------------------------------
Predict the output or error(s) for the following:
---------------------------------------------------------------------------------------------------------------------------------------
 91) In the following pgm add a stmt in the function fun such that the address of
'a' gets stored in 'j'.
main(){
int * j;
void fun(int **);
fun(&j);
}
void fun(int **k) {
int a =0;
/* add a stmt here*/
}
Answer:
*k = &a
Explanation:
The argument of the function is a pointer to a pointer.
---------------------------------------------------------------------------------------------------------------------------------------
92) What are the following notations of defining functions known as?
i.
int abc(int a,float b)
{
/* some code */
}
ii. int abc(a,b)
int a; float b;
{
/* some code*/
}
Answer:
i. ANSI C notation
ii. Kernighan & Ritche notation
---------------------------------------------------------------------------------------------------------------------------------------
93) main()
{
char *p;
p="%d\n";
p++;
p++;
printf(p-2,300);
}
Answer:
300
Explanation:
The pointer points to % since it is incremented twice and again
decremented by 2, it points to '%d\n' and 300 is printed.
---------------------------------------------------------------------------------------------------------------------------------------
94) main(){
char a[100];
a[0]='a';a[1]]='b';a[2]='c';a[4]='d';
abc(a);
}
abc(char a[]){
a++;
printf("%c",*a);
a++;
printf("%c",*a);
}
Explanation:
The base address is modified only in function and as a result a points to 'b'
then after incrementing to 'c' so bc will be printed.
---------------------------------------------------------------------------------------------------------------------------------------
95) func(a,b)
int a,b;
{
return( a= (a==b) );
}
main()
{
int process(),func();
printf("The value of process is %d !\n ",process(func,3,6));
}
process(pf,val1,val2)
int (*pf) ();
int val1,val2;
{
return((*pf) (val1,val2));
}
Answer:
The value if process is 0 !
Explanation:
The function 'process' has 3 parameters - 1, a pointer to another function 2
and 3, integers. When this function is invoked from main, the following
substitutions for formal parameters take place: func for pf, 3 for val1 and 6
for val2. This function returns the result of the operation performed by the
function 'func'. The function func has two integer parameters. The formal
parameters are substituted as 3 for a and 6 for b. since 3 is not equal to 6,
a==b returns 0. therefore the function returns 0 which in turn is returned
by the function 'process'.
---------------------------------------------------------------------------------------------------------------------------------------
96) void main()
{
static int i=5;
if(--i){
main();
printf("%d ",i);
}
}
Answer:
0 0 0 0
Explanation:
The variable "I" is declared as static, hence memory for I will be allocated
for only once, as it encounters the statement. The function main() will be called
recursively unless I becomes equal to 0, and since main() is recursively called, so
the value of static I ie., 0 will be printed every time the control is returned.
---------------------------------------------------------------------------------------------------------------------------------------
97) void main()
{
int k=ret(sizeof(float));
printf("\n here value is %d",++k);
}
int ret(int ret)
{
ret += 2.5;
return(ret);
}
Answer:
Here value is 7
Explanation:
The int ret(int ret), ie., the function name and the argument name can be
the same.
Firstly, the function ret() is called in which the sizeof(float) ie., 4 is
passed, after the first expression the value in ret will be 6, as ret is integer hence
the value stored in ret will have implicit type conversion from float to int. The ret
is returned in main() it is printed after and preincrement.
---------------------------------------------------------------------------------------------------------------------------------------
98) void main()
{
char a[]="12345\0";
int i=strlen(a);
printf("here in 3 %d\n",++i);
}
Answer:
here in 3 6
Explanation:
The char array 'a' will hold the initialized string, whose length will be
counted from 0 till the null character. Hence the 'I' will hold the value equal to 5,
after the pre-increment in the printf statement, the 6 will be printed.
---------------------------------------------------------------------------------------------------------------------------------------
99) void main()
{
unsigned giveit=-1;
int gotit;
printf("%u ",++giveit);
printf("%u \n",gotit=--giveit);
}
Answer:
0 65535
---------------------------------------------------------------------------------------------------------------------------------------
100) void main()
{
int i;
char a[]="\0";
if(printf("%s\n",a))
printf("Ok here \n");
else
printf("Forget it\n");
}
Answer:
Ok here
Explanation:
Printf will return how many characters does it print. Hence printing
a null character returns 1 which makes the if statement true, thus
"Ok here" is printed.
 ---------------------------------------------------------------------------------------------------------------------------------------
101) void main()
{
void *v;
int integer=2;
int *i=&integer;
v=i;
printf("%d",(int*)*v);
}
Answer:
Compiler Error. We cannot apply indirection on type void*.
Explanation:
Void pointer is a generic pointer type. No pointer arithmetic can be
done on it. Void pointers are normally used for,
1. Passing generic pointers to functions and returning such pointers.
2. As a intermediate pointer type.
3. Used when the exact pointer type will be known at a later point of
time.
---------------------------------------------------------------------------------------------------------------------------------------
102) void main()
{
int i=i++,j=j++,k=k++;
printf(―%d%d%d‖,i,j,k);
}
Answer:
Garbage values.
Explanation:
An identifier is available to use in program code from the point of its
declaration.
So expressions such as i = i++ are valid statements. The i, j and k are
automatic variables and so they contain some garbage value. Garbage in is
garbage out (GIGO).
---------------------------------------------------------------------------------------------------------------------------------------
103) void main()
{
static int i=i++, j=j++, k=k++;
printf(―i = %d j = %d k = %d‖, i, j, k);
}
Answer:
i = 1 j = 1 k = 1
Explanation:
Since static variables are initialized to zero by default.
---------------------------------------------------------------------------------------------------------------------------------------
104) void main()
{
while(1){
if(printf("%d",printf("%d")))
break;
else
continue;
}
}
Answer:
Garbage values
Explanation:
The inner printf executes first to print some garbage value. The printf
returns no of characters printed and this value also cannot be predicted.
Still the outer printf prints something and so returns a non-zero value. So
it encounters the break statement and comes out of the while statement.
---------------------------------------------------------------------------------------------------------------------------------------
104)
main()
{
unsigned int i=10;
while(i-->=0)
printf("%u ",i);
}
Answer:
10 9 8 7 6 5 4 3 2 1 0 65535 65534.....
Explanation:
Since i is an unsigned integer it can never become negative. So the
expression i-- >=0 will always be true, leading to an infinite loop.
---------------------------------------------------------------------------------------------------------------------------------------
105) #include<conio.h>
main()
{
int x,y=2,z,a;
if(x=y%2) z=2;
a=2;
printf("%d %d ",z,x);
}
Answer:
Garbage-value 0
Explanation:
The value of y%2 is 0. This value is assigned to x. The condition reduces
to if (x) or in other words if(0) and so z goes uninitialized.
Thumb Rule: Check all control paths to write bug free code.
---------------------------------------------------------------------------------------------------------------------------------------
106) main()
{
int a[10];
printf("%d",*a+1-*a+3);
}
Answer:
4
Explanation:
*a and -*a cancels out. The result is as simple as 1 + 3 = 4 !
---------------------------------------------------------------------------------------------------------------------------------------
107) #define prod(a,b) a*b
main()
{
int x=3,y=4;
printf("%d",prod(x+2,y-1));
}
Answer:
10
Explanation:
The macro expands and evaluates to as:
x+2*y-1 => x+(2*y)-1 => 10
---------------------------------------------------------------------------------------------------------------------------------------
108) main()
{
unsigned int i=65000;
while(i++!=0);
printf("%d",i);
}
Answer:
1
Explanation:
Note the semicolon after the while statement. When the value of i
becomes 0 it comes out of while loop. Due to post-increment on i the
value of i while printing is 1.
---------------------------------------------------------------------------------------------------------------------------------------
109)
main()
{
int i=0;
while(+(+i--)!=0)
i-=i++;
printf("%d",i);
}
Answer:
-1
Explanation:
Unary + is the only dummy operator in C. So it has no effect on the
expression and now the while loop is,
while(i--!=0) which is false
and so breaks out of while loop. The value –1 is printed due to the post-
decrement operator.
---------------------------------------------------------------------------------------------------------------------------------------
113)
main()
{
float f=5,g=10;
enum{i=10,j=20,k=50};
printf("%d\n",++k);
printf("%f\n",f<<2);
printf("%lf\n",f%g);
printf("%lf\n",fmod(f,g));
}
Answer:
Line no 5: Error: Lvalue required
Line no 6: Cannot apply leftshift to float
Line no 7: Cannot apply mod to float
Explanation:
Enumeration constants cannot be modified, so you cannot apply ++.
Bit-wise operators and % operators cannot be applied on float values.
fmod() is to find the modulus values for floats as % operator is for ints.
---------------------------------------------------------------------------------------------------------------------------------------
110)
main()
{
int i=10;
void pascal f(int,int,int);
f(i++,i++,i++);
printf(" %d",i);
}
void pascal f(integer :i,integer:j,integer :k)
{
write(i,j,k);
}
Answer:
Compiler error: unknown type integer
Compiler error: undeclared function write
Explanation:
Pascal keyword doesn‘t mean that pascal code can be used. It means that
the function follows Pascal argument passing mechanism in calling the functions.
---------------------------------------------------------------------------------------------------------------------------------------
111)
void pascal f(int i,int j,int k)
{
printf(―%d %d %d‖,i, j, k);
}
void cdecl f(int i,int j,int k)
{
printf(―%d %d %d‖,i, j, k);
}
main()
48{
int i=10;
f(i++,i++,i++);
printf(" %d\n",i);
i=10;
f(i++,i++,i++);
printf(" %d",i);
}
Answer:
10 11 12 13
12 11 10 13
Explanation:
Pascal argument passing mechanism forces the arguments to be called
from left to right. cdecl is the normal C argument passing mechanism where the
arguments are passed from right to left.
---------------------------------------------------------------------------------------------------------------------------------------
112)What is the output of the program given below
main()
{
signed char i=0;
for(;i>=0;i++) ;
printf("%d\n",i);
}
Answer
-128
Explanation
Notice the semicolon at the end of the for loop. THe initial value of
the i is set to 0. The inner loop executes to increment the value
from 0 to 127 (the positive range of char) and then it rotates to the
negative value of -128. The condition in the for loop fails and so
comes out of the for loop. It prints the current value of i that is -128.
---------------------------------------------------------------------------------------------------------------------------------------
113) main()
{
unsigned char i=0;
for(;i>=0;i++) ;
printf("%d\n",i);
}
Answer
infinite loop
Explanation
The difference between the previous question and this one is that the char
is declared to be unsigned. So the i++ can never yield negative value and i>=0
never becomes false so that it can come out of the for loop.
 ---------------------------------------------------------------------------------------------------------------------------------------
114) main()
{
char i=0;
for(;i>=0;i++) ;
printf("%d\n",i);
}
Answer:
Behavior is implementation dependent.
Explanation:
The detail if the char is signed/unsigned by default is
implementation dependent. If the implementation treats the char to be
signed by default the program will print –128 and terminate. On the other
hand if it considers char to be unsigned by default, it goes to infinite loop.
Rule:
You can write programs that have implementation dependent
behavior. But dont write programs that depend on such behavior.
---------------------------------------------------------------------------------------------------------------------------------------
115) Is the following statement a declaration/definition. Find what does it mean?
int (*x)[10];
Answer
Definition.
x is a pointer to array of(size 10) integers.
Apply clock-wise rule to find the meaning of this definition.
---------------------------------------------------------------------------------------------------------------------------------------
116). What is the output for the program given below
typedef enum errorType{warning, error, exception,}error;
main()
{
error g1;
g1=1;
printf("%d",g1);
}
Answer
Compiler error: Multiple declaration for error
Explanation
The name error is used in the two meanings. One means that it is a
enumerator constant with value 1. The another use is that it is a type name
(due to typedef) for enum errorType. Given a situation the compiler
cannot distinguish the meaning of error to know in what sense the error is
used:
error g1;
g1=error;
// which error it refers in each case?
When the compiler can distinguish between usages then it will not
issue error (in pure technical terms, names can only be overloaded in
different namespaces).
Note: the extra comma in the declaration,
enum errorType{warning, error, exception,}
is not an error. An extra comma is valid and is provided just for
programmer‘s convenience.
---------------------------------------------------------------------------------------------------------------------------------------
117)
typedef struct error{int warning, error, exception;}error;
main()
{
error g1;
g1.error =1;
printf("%d",g1.error);
}
Answer
1
Explanation
The three usages of name errors can be distinguishable by the compiler at
any instance, so valid (they are in different namespaces).
Typedef struct error{int warning, error, exception;}error;
This error can be used only by preceding the error by struct kayword as in:
struct error someError;
typedef struct error{int warning, error, exception;}error;
This can be used only after . (dot) or -> (arrow) operator preceded by the variable
name as in :
g1.error =1;
printf("%d",g1.error);
typedef struct error{int warning, error, exception;}error;
This can be used to define variables without using the preceding struct keyword
as in:
error g1;
Since the compiler can perfectly distinguish between these three usages, it is
perfectly legal and valid.
Note
This code is given here to just explain the concept behind. In real
programming don‘t use such overloading of names. It reduces the readability of
the code. Possible doesn‘t mean that we should use it!
---------------------------------------------------------------------------------------------------------------------------------------
118)
#ifdef something
int some=0;
#endif
main()
{
int thing = 0;
printf("%d %d\n", some ,thing);
}
Answer:
Compiler error : undefined symbol some
Explanation:
This is a very simple example for conditional compilation. The
name something is not already known to the compiler making the
declaration
int some = 0;
effectively removed from the source code.
---------------------------------------------------------------------------------------------------------------------------------------
119)
#if something == 0
int some=0;
#endif
main()
{
int thing = 0;
printf("%d %d\n", some ,thing);
}
Answer
0 0
Explanation
This code is to show that preprocessor expressions are not the
same as the ordinary expressions. If a name is not known the
preprocessor treats it to be equal to zero.
---------------------------------------------------------------------------------------------------------------------------------------
120). What is the output for the following program
main()
{
int arr2D[3][3];
printf("%d\n", ((arr2D==* arr2D)&&(* arr2D == arr2D[0])) );
}
Answer
1
Explanation
This is due to the close relation between the arrays and pointers. N
dimensional arrays are made up of (N-1) dimensional arrays.
52arr2D is made up of a 3 single arrays that contains 3 integers each .
arr2D
arr2D[1]
arr2D[2]
arr2D[3]
The name arr2D refers to the beginning of all the 3 arrays. *arr2D
refers to the start of the first 1D array (of 3 integers) that is the
same address as arr2D. So the expression (arr2D == *arr2D) is true
(1).
Similarly, *arr2D is nothing but *(arr2D + 0), adding a zero
doesn‘t change the value/meaning. Again arr2D[0] is the another
way of telling *(arr2D + 0). So the expression (*(arr2D + 0) ==
arr2D[0]) is true (1).
Since both parts of the expression evaluates to true the result is
true(1) and the same is printed.
---------------------------------------------------------------------------------------------------------------------------------------
121) void main()
{
if(~0 == (unsigned int)-1)
printf(―You can answer this if you know how values are represented in
memory‖);
}
Answer
You can answer this if you know how values are represented in
memory
Explanation
~ (tilde operator or bit-wise negation operator) operates on 0 to
produce all ones to fill the space for an integer. –1 is represented in
unsigned value as all 1‘s and so both are equal.
---------------------------------------------------------------------------------------------------------------------------------------
122) int swap(int *a,int *b)
{
*a=*a+*b;*b=*a-*b;*a=*a-*b;
}
main()
{
int x=10,y=20;
swap(&x,&y);
printf("x= %d y = %d\n",x,y);
}
Answer
x = 20 y = 10
Explanation
This is one way of swapping two values. Simple checking will help
understand this.
---------------------------------------------------------------------------------------------------------------------------------------
123) main()
{
char *p = ―ayqm‖;
printf(―%c‖,++*(p++));
}
Answer:
b
---------------------------------------------------------------------------------------------------------------------------------------
124) main()
{
int i=5;
printf("%d",++i++);
}
Answer:
Compiler error: Lvalue required in function main
Explanation:
++i yields an rvalue. For postfix ++ to operate an lvalue is
required.
---------------------------------------------------------------------------------------------------------------------------------------
125)
main()
{
char *p = ―ayqm‖;
char c;
c = ++*p++;
printf(―%c‖,c);
}
Answer:
b
Explanation:
There is no difference between the expression ++*(p++) and
++*p++. Parenthesis just works as a visual clue for the reader to
see which expression is first evaluated.
---------------------------------------------------------------------------------------------------------------------------------------